The Linear Crossfire
Perfect for RECTANGULAR openings, the LINEAR Crossfire burners keep a narrow profile while still packing tall flames and big heat. Complete with all-brass construction, a limited-lifetime warranty, and twice the flame as standard stainless steel burners.
Linear Burner: 110,000 BTU Warming Trends Crossfire – For 26” x 6” Opening or LargerFrom: $444.00 All Crossfire Burners
Linear Burner: 130,000 BTU Warming Trends Crossfire – For 32” x 8” Opening or LargerFrom: $518.00 All Crossfire Burners
Linear Burner: 150,000 BTU Warming Trends Crossfire – For 38” x 8” Opening or LargerFrom: $574.00 All Crossfire Burners
Linear Burner: 170,000 BTU Warming Trends Crossfire: 34″ BurnerFrom: $620.00 All Crossfire Burners
Linear Burner: 190,000 BTU Warming Trends Crossfire – For 44” x 8” Opening or LargerFrom: $665.00 All Crossfire Burners
Linear Burner: 210,000 BTU Warming Trends Crossfire – For 50” x 10” Opening or LargerFrom: $739.00 All Crossfire Burners
Linear Burner: 250,000 BTU Warming Trends Crossfire – For 56” x 10” Opening or LargerFrom: $829.00 All Crossfire Burners
Linear Burner: 270,000 BTU Warming Trends Crossfire – For 62” x 12” Opening or LargerFrom: $928.00 All Crossfire Burners
Linear Burner: 90,000 BTU Warming Trends Crossfire – For 20” x 6” Opening or LargerFrom: $399.00 All Crossfire Burners
Top Fuel Answers
There are various pros/cons of Liquid Propane (LP) and Natural Gas (NG). The difference between LP and NG burners that we carry are the “jets”. If, down the road, you need to convert from LP to NG or vice-versa, you can do so by purchasing replacement jets from us at $25 each.
Propane – pros
- Opens up new location possibilities
- Sometimes NG is not available
Propane – cons
- More expensive to burn than NG
- Heavier than air, so it sinks down. This makes ventilation more important.
- Requires refilling the tank
- Hiding the propane tank can present new aesthetic challenges
- Black soot tends to build up faster on fire media such as ceramic logs and cannonballs (it can be cleaned off)
Natural Gas – Pros
- Cheaper to burn; you probably won’t even notice an increase in your gas bill
- You won’t run out, so burn to your heart’s content without the dreaded “we’re out of gas”
- Since it’s lighter than air and rises, there’s less likelihood of unwanted fuel accumulation in the vessel
- Slightly cleaner burning; less soot build up
Natural Gas – Cons
- Limited to what’s available in your area
- May require upgraded meter or larger diameter fuel lines to provide adequate BTUs
- The volume and pressure can be affected by other appliances
- Might require a longer gas line, depending on where your fire feature will live
- Would be difficult to change the fire feature’s location after installation
- Check the side of your gas meter for a BTU rating. Most commonly they are rated at 250K BTUs
In order to get the proper volume and pressure of fuel, you need a gas line that is large enough in diameter to carry it sufficiently. For the most accurate assessment, consult a fuel professional. For a rough estimate, utilize our gas line sizing charts below.
*Make sure the BTUs from your line can supply at least 60-70% of what the burner is rated at.
Gas line sizing variables
- Using angled couplings can reduce the volume/flow of fuel
- Adding a 90 degree angle in your line adds the equivalent of 5 feet of distance
- Running different sized lines over various distances is acceptable, but for maximum fuel volume, run larger lines over long distances
- Number of appliances, whether it’s a dedicated line or not; all these factors play a role in volume and pressure
- Pro Tip: if you haven’t installed your gas line yet, consider running it in conduit so that if you ever need to repair or change it, you won’t have to dig it up
You can have great gas pressure, but if your line is too small, you may not get the desired flame. Think about it like filling up a swimming pool. If you reduce the nozzle size significantly, you may have a ton of pressure, but it’s going to take longer to fill up the pool. You need both pressure and volume to get a great flame. This is why the size of the gas line is so important.
Now that you understand the importance of volume (BTUs), let’s talk pressure.
- LP: 11-13″ water column (w.c.)
- NG: 7-10″ water column (w.c.)
Water Column is the term used to measure pressure. There are 27.7 inches of water column pressure in 1 PSI of pressure. So 7″wc is about 1/4 PSI. This is the normal pressure that household natural gas is delivered.
The device used to measure pressure of this type is called a Manometer
Pressure too High? You may experience unwanted noise
Pressure too Low? The flame will not be as tall and hot
Location of Gas Stub
- Can be off-center or on-center, depending on the size of your fire feature
- The key valve is generally located on the side of the fire pit, so if it makes sense for your build, place the gas stub off-center to reduce the distance of gas stub to key valve
- Instruct the contractor to keep the gas stub as low as possible to make room for electronic ignition, or in the case that the plate sets fairly low
- On some builds, the plate sits only 8″ off the ground
You DO NOT need an air mixer with any of our burners. Air is mixed at each jet.
- For optimal regulation for burners over 200K BTUs, contact a local propane supplier
- For regulators 200K BTUs or lower, CLICK HERE
- From the tank, propane is HIGH PRESSURE, so it must be regulated down, because the burners are low pressure
- For longer gas lines, we often use a high pressure (10psi) regulator at the tank end, and a “2nd stage” regulator on the other end of the line to bring the pressure to 11-13″wc
- Consult a professional (plumber/HVAC)
Standard 20lb Tank
- A standard 20lb/5 gallon BBQ propane tank can be used for burner systems 180K BTUs and under
- The FIRE CUBE is a complete unit that can have a self-contained propane tank
- Burn time varies from 6-12 hours, depending on how hot you run it
- Results may vary, and it is common for the fuel to “freeze up” with burners 180K BTUs and up. What that means is that after 45 minutes or so, the flame only goes to about half. Remedy this by using two tanks connected together
- This is a better option for most of our burners from 100K to 200k BTUs
- It will give you longer burn times
- Still relatively small and easy to move
High Volume Tanks
- Contact your local propane supplier
Hiding the Tank
- You can always run a larger diameter line and hide the tank in an inconspicuous location
- You can purchase 20lb propane tank covers that make hiding the tank a cinch
- All of our burners burn with incredible efficiency due to the engineered jets. They mix fuel and oxygen at the flame which makes it taller, brighter, and hotter using less fuel
- Read all about how much fuel you might be burning at full capacity – Learn More
*Note: our burners will burn with more efficiency than others because of the proprietary jets
Compliance with the following standards:
- ANSI Z21.97/CSA 2.41 Outdoor Decorative Gas Appliances
- The burner system is certified nationally, however, it is up to the customer or contractor to verify local requirements
Effective May 5, 2021 over 100 Warming Trends CROSSFIRE burners will be approved for use in Massachusetts.
All gas products approved for use can be found on the Massachusetts Consumer Affairs and Business Regulation (OCABR) website: Office of Consumer Affairs and Business Regulation (OCABR). To confirm the approval of a product, simply:
- Visit the OCABR website.
- Select “Product Information” from the drop down, then click “Go.”
- Enter Product information.
- Select “Gas”
- Manufacturer: Warming Trends, LLC
- Model Number: Enter the burner type and BTU output (i.e. CFB180, CFBT290, CFBO140) If you do not have the model information, you may search using only the manufacturer name to bring up all Warming Trends burners that are accepted.
Click “Find Products” and see the listing of accepted products.
Most metropolitan areas in Canada will require an automatic shutoff for fire pits over 65K BTUs in order to get a permit or certification.
- Our Premium Electronic Ignition system has the proper fuel and flame censors to automatically shut down the fire when needed. Combine it with a dial timer to increase safety and ease.
- You can still purchase higher BTU burners without the premium ignition, and we will ship it with a fitting that limits the burner to 65K BTUs in the case that you’d like to have it certified.
Choosing the Right Size
Use these measurements as a good starting point for your designing and planning.
Round & Square standard opening sizes
- 18″, 24″, 30″, 36″, 42″, 48″, 60″
- Add .5″ to 1″ to your opening to make room for the plate
Rectangular standard opening sizes
- See H-STYLE and TREE-STYLE burner pages and use the Plate sizes to determine standard opening sizes
- Add .5″ to 1″ to your opening to make room for the plate
Ideal ledge width to set drinks on, put feet up on, etc…
- 7″ to 12″
How deep to mount the plate:
- 3″ to 5″ (plate to top of burner jet is 3″)
Clearance from fire to:
- Top ledge: 5″-6″
- Combustible building/wall: 36″
- Combustible ceiling/overhang: 10′
Click image below for a visual clearance guide
Burner/Plate/BTU size reference – Click Here
Shape & Size
- Square, Round, Rectangular, Custom
- Standard Round & Square Opening sizes
- 18″, 24″, 30″, 36″, 42″, 48″, 60″
Do you need a plate/pan?
This part is simple: just make sure your gas line can supply at least 60-70% of what the burner is rated at.
- Desired Burner: 180K BTUs
- Minimum Required Fuel Volume: at least 108K BTUs
- All of the burners we carry are HOT
- All Crossfire models have the same “jets”; providing hotter, brighter, taller flames
Why do Warming Trends burners have so many more BTUs than others?
- The secret is in the jets (no, you can’t just buy the jets. Nice try!)
- Other burners are made by poking small holes in stainless steel tubes. Gas just seeps out without mixing oxygen. The flame is small and not as hot or controlled, hence the smaller BTU ratings
- Going with a stainless steel burner greatly increases the risk of being bummed with your fire
- Crossfire burners produce twice the amount of flame with the same amount of fuel as conventional stainless steel burners
Almost everyday we get inquiries like this: “I have a fire pit with a stainless steel burner but I’m not happy with the flame. It’s only 5″ high and it doesn’t put out any heat. What can I do?”
This is the reason why we ONLY carry Warming Trends Crossfire brass burners; because we don’t want to have that difficult conversation with our customers. If you have an adequate fuel supply, you WILL be satisfied with our burners!
You may pay more upfront for all brass, but you will pay less over time for these reasons:
- Brass does not corrode over time like stainless steel
- You won’t feel the need to “upgrade” to get a better flame… you will already have THE BEST
- Limited LIFETIME warranty!
- Twice the flame
Montana Fire Pits is an authorized dealer of the best gas fire pit burner available on the market. No burner compares to Warming Trends Crossfire Burners. We guarantee it. When purchasing a Warming Trends Crossfire Burner, you have the option to include a key valve kit and a standard round or square aluminum plate. The key valve kit includes everything you need to hook up your new burner such as the flex line, key valve, and key. We make it easy on you by adding these as opt-ins once you’ve chosen your ideal burner. Buy the burner by itself or select your preferred valve and burner plate kit from the drop-down before adding to your cart. Simple!
Montana Fire Pits offers Crossfire burners, the brand you trust to ensure your backyard fire pit or table remains in the best possible working order. We make ordering easy by offering all of the additional pieces you need for your Crossfire burner to be ready for your fixture right out of the box. We know choosing the right burner can be a difficult decision. That’s why we also offer a free guide to fire pit accessories. So whether you are building your first fire pit, or you are an old pro, we have the equipment and knowledge to ensure your backyard fixture looks great and works to your expectations. For more information, contact us today.